Product information at 17/10/2025, 09:12
|
0.00 €incl. VAT | plus Shipping Cost
|
AKG C 562 BL
The C 562 BL is an excellent tool for getting uncolored recordings of acoustic instruments or a choir. Here are some examples: 1) Choir/brass section: Mount two C 562 BLs on a reflecting surface, about 3 to 5 feet (1 to 1.5 m) apart (A-B stereo technique). Place the choir or brass section about 7 to 10 feet (2 to 3 m) in front of the mics. 2) Acoustic guitar: Mount a single C 562 BL on a reflecting surface at the same height as the guitarist's seat. Place the mic about 1 to 1 1/2 feet (30 to 40 cm) from the guitar. Many engineers use this as a spot/ambience microphone in a main microphone setup. This technique works best in rooms with good acoustics.
Specifications
- Polar pattern: omnidirectional (hemispherical)
- Frequency range: 20 to 20,000 Hz
- Sensitivity: 20 mV/Pa (-34 dBV)
- Max. SPL: 130 dB (1% THD)
- Equivalent noise level (CCIR 468-3): 26 dB
- Equivalent noise level: 16 dB-A
- Signal/noise ratio (A-weighted): 78 dB
- Bass filter: 12 dB/octave at 150 Hz
- Impedance: 600 ohms
- Recommended load impedance: >2000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN 45596
- Current consumption: <2 mA
- Connector: 3-pin XLR
- Cable: 3 m (10 ft.)
- Finish: dark gray
- Dimensions: 160 dia. x 9 mm / 6.3 dia. x 0.35 in.
- Net weight: 950 g / 2.1 lbs.
- Shipping weight: 1.9 kg / 4.2 lbs.
|
Musikhaus Korn - Division of KORN e.K. KORN e.K. Inhaber: Denis Korn Thomas-Müntzer-Straße 4 04758 Oschatz Deutschland USt-ID-Nr.: DE 165 839 418 eingetragen im Handelsregister des Amtsgerichtes Leipzig Handelsregisternummer HRA 16661 WEEE-Reg.-Nr. DE 12745699 |
Business hours
|
