Apex GX230 2 30-Band Grafik-Equalizer

Apex GX230 2 30-Band Grafik-Equalizer Product Details

Description

GX 230 Graphic Equaliser



Features

• DLT - technologie for perfectly flat amplitude and phase response
• 2 independent channels
• In/out switch for instant comparison with flat response
• 6/12 dB scale switches on graphic equaliser
• Selectable Butterworth 30 Hz high pass filters with 18 dB/octave slope
• 30 mm precision faders
• Comprehensive frontpanel lay-out
• Symmetrical in - and output
• Earth-lift switch
• Robust mechanical construction
• Constant Q design
• Available gain between in- and output: 6 dB
• Overload indicators: peak-peak sensing circuit giving overload indication for all circuits in the equaliser
• Failsafe bypass : The inputs are instantly connected to the outputs in case of power failure or power supply malfunction
• Extensive RF suppression
• XLR on in- and outputs
• Floating, transformerlike, electronically balanced output stages
• Power transformer with static screening for rejecting of power line interferences

Technical Specifications

• Input
  
  Electronically balanced
  
  RF suppresion with LC filters - Absolute overload point: +21dBm
  
  Impedance: 1OK (each leg) in parallel with 560 pF equal impedance for "+" and "-" legs
  
  XLR-6 type connector
  
     connections: 1 signal ground; 2 hot (+) and 3 cold (-)
• Output
  
  Electronically balanced and floating simulating transformer output with app. 50 KOhm/560pF to ground impedance for each leg
  
  RF suppresion with LC filters
  
  Impedance: 50 Ohms (each leg)
  
  Max level: +20 dBm into 60 Ohms
  
  Output symmetry balance better than 65dB (20Hz-20KHz IEC)
  
  Optional output transformer retrofittable
  
  XLR-3 type connector
  
     connections: 1 signal ground; 2 hot (+); 3 cold (-)
• Performance
  
  frequency responce: +-0,5dB, 20Hz-20KHz (Eq switches out))
  
  THD: .01% 20Hz-20KHZ
  
  Noise: -90dBm (typ. -98dBm), 22Hz-22KHz graphic nequaliser in circuit (0dB setting)
  
  Level control:- to +6dB
  
  Overload indicator lights for approximately 200ms if the instaneous peak voltage (+ or -) at any point in the aqualiser comes within 1dB of clipping
• Filters
  
  Graphic aqualiser:
  
    30 1/3 octave center frequencies
  
    25Hz-20KHz
  
    Center frequency tolerance: +-1%
  
    Q tolerance: +-1%
  
    Max boost/cut: 12dB
  
    Switchable in/out signalpath
  
  High pass filter:
  
    Type: maximally flat 18dB/octave
  
    Fixed cut off frequency 30Hz
  
    Switchable slope 6/12 dB/octave
• Power requirements
  
  Voltage: 110/120/220/240V 50/60Hz
  
  Consumption: 20VA
  
  IEC type connector
• Size: 483mm (19inch) wide x 133mm high x 200mm deep
• Weight: app. 6kg