Audac COM 24 MK 2 ELA Mischverstärker

Audac COM 24 MK 2 ELA Mischverstärker Product Details

Description

The ELA mixing amplifier Audac COM 24 MK 2 with 240 Watt power is ideally suited as a solution for small to medium-sized commercial sound reinforcement systems. The COM24 offers an output power of 240 Watt and is suitable for use in 100 Volt ELA systems or low impedance systems (4 Ohm impedance). Six input channels with independent level control make it possible to connect and mix a wide variety of input sources. Four balanced XLR microphone inputs with 15 V phantom power are available for connecting microphones (virtually all dynamic and condenser microphones), including two priority channels. Two additional inputs can be used either as unbalanced stereo line inputs (RCA) for connecting CD players, music computers or mobile devices or as microphone inputs (6.3 mm jack) - so that a total of 6 microphone inputs are available if required. In addition, the mixing amplifier has a remote microphone input and a tele pager input to extend the system with a pager station (with gong/signal tone) or for connection to an operational telecommunications system (or any other system with priority). If the "Priority Mute" contact is assigned, coupling and muting can take place via an external fire alarm system. The output level can be controlled via the master volume control, supplemented by a 2-band tone control. The level is indicated by a VU bargraph display (5 segments); zone selection buttons (5 zones) are available for selecting the outputs. The amplifier is suitable both for desktop installation and for installation in a 19" rack (2 U, rack adapter included).

Features:

• ELA mixer amplifier 240 W
• 240 watts (RMS) Output power
• Zone selection buttons (5 zones)
• Low ohmic and 100 V outputs
• Various line and microphone inputs
• Microphone channels with phantom power (4 x) and priority circuit (2 x)
• Remote microphone and pager connectors
• Independent control of input levels
• priority mute contact
• Desktop or 19" rack installation

Technical data:

• Product type: Output stages
• Type: 100 V Mixer / Power amplifier
• Input channels: 6 + Tele-Paging + Remote Mic
• Amplifier power: 240 W
• Microphone channels: 4
• Microphone channels with phantom power: 2
• Controls Microphone channels: Gain , Volume
• Microphone channels with priority switching: 2
• Microphone channels with remote function: 2
• Line / Microphone Inputs: 2
• Line / microphone input connectors: 2 x Cinch , 6.3 mm jack
• Controls Line / Microphone channels: Gain , Volume
• Zone outputs: 5
• Zone output connections: Phoenix/Euroblock
• Phone paging input: 1
• Music on hold output: 1
• Link input: 1
• Link output: 1
• Amplifier input: 1
• Preamplifier output: 1
• Low impedance outputs: 1
• Main section controls: Bass , Master volume , Power On/Off , Treble
• Display elements Main section: 5-segment Level Meter , Protect , Signal
• Protection circuits: Short-circuit , Overheating , Overload
• Operating voltage: 230 V AC, 50 - 60 Hz
• Dimensions (WxHxD): 420 x 88 x 320 mm
• Weight: 11 kg