BMS 4592 NEODYMIUM 2 Zoll TREIBER 8 OHM

BMS 4592 NEODYMIUM 2 Zoll TREIBER 8 OHM Product Details

Description

BMS 4592 NEODYMIUM 2"DRIVER 8 OHM
Extended bandwidth (300 - 22.000 Hz)
High efficiency
With two subsystems in one, each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion
Excellent phase coherence
Point source sound reproduction
Perfect time alignment without the problems of multi-source interference
Magnetically shielded
Ultra lightweight and small size

In a conventional full range compression driver the phase plug must be located extremely close to the diaphragm, excursion of the diaphragm is limited and middle frequency performance is compromised.

A typical 2" dome compression driver has a limited high frequency response. Over 8 kHz the dome diaphragm breaks up causing resonance and harsh, metallic sound.

The patented design of the BMS 4592 ND is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency.

The BMS annular midrange diaphragm covers the frequency range between 400 and 7.000 Hz with a smooth, linear response. The large diaphragm excursion of max. +/-0,8 mm results in high output and increased power handling up to 1.300 W peak.

The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz.

Specifications 4592 ND

Throat diameter 2" (50,8 mm)

Nominal impedance 8 or 16 Ohm

Power capacity

Middle range (AES) 150 W above 400 Hz

peak 1.000 W above 500 Hz

High range (AES) 80 W

peak 320 W

Sensitivity 118 dB on 2242 Horn

Frequency range 200 - 22.000 Hz

Recommended crossover 300 Hz

Middle frequency range 300 - 7.000 Hz

High frequency range 6.000 - 22.000 Hz

Middle/High crossover 6.300 Hz

Voice coil high-range 1,75" (44,4 mm)

Voice coil mid-range 3,5 " (90 mm)

Magnet material Neodymium

Flux density high-range 2,0 T

Flux density mid-range 1,95 T

Efficiency 35% (300 - 5.000 Hz)

Voice coil material Cooper Clad Aluminium (2 layers inside and outside of the VC)

Voice coil former Kapton

Diaphragm material Polyester



Mounting information

Overall Diameter 132 mm (+ 3 mm)

Depth 113 mm

Net weight 2,3 kg

Four M6 holes, 90° on 101,6 mm, 4" diameter