Dynacord DSP 244

Dynacord DSP 244 Product Details

Description

The DSP 244 sets new standards in the field of digital loudspeaker system controllers and Offers 48-bit algorithms, linear 24-bit AD/DA-conversion and a dynamic range of more than 115 dB. Its 2-in-4-design and a dynamic range that exceeds 115dB, the DSP244 is the ideal controller and manager in any active 2-, 3- or 4-way audio system installation. The freely configurable routing allows assigning a single input or the summed signal of both inputs to each of the 4 outputs. Together with its extensive filtering capabilities, which can also be applied to the input signals, the DSP244 represents the convincing toolbox for the classical management of any loudspeaker system set-up. Whether in theatres or concert halls and no matter if used in mobile or fixed installations, the DSP244 represents always the optimum solution. The DSP244’s locking function offers convenient protection against unallowed operation. The DSP244 comes with RS-232 and a complete MIDIinterface.

Features

Comprehensive Signal Processing

Universal ”Tool-Box”

Reliable Operation

A total of 26 EQs

X-Over: Butterworth, Linkwitz Riley, Bessel (6, 12, 28, 24 dB/oct.)

2.7sec Delay (overall)

Compressor / Limiter

Programmable Routing

Channel Routing LEDs

Channel Mutes

50 Factory Presets

30 User Memories

Specs

Mains Voltage : 90 - 250 VAC / 50 - 60 H

Power Consumption : 20 W

Inputs : 2 x XLR IN, electronically balanced, transformer optional, 2 x XLR OUT (Direct Out)

Nominal Input Voltage : 1.55 V / + 6 dBu

Max. Input Voltage : 24.5 V / + 30 dBu

Input Impedance : 20 kohms

Common Mode Rejection : > 40 dB

A/D Conversion : 24-bit, Sigma-Delta, 128 times oversampling, linear phase

Outputs : 4 x XLR OUT, electronically balanced

Nominal Output Voltage : 1.55 V / + 6 dBu

Max. Output Voltage : 8.7 V / + 21 dBu

Output Impedance : < 100 ohms

Min. Load Impedance : 600 ohms

D/A Conversion : 24-bit, Sigma-Delta, 128 times oversampling

Frequency Response : 20 Hz - 20 kHz (-0.5 dB)

S/N Ratio : 115 dB (typical)

THD without transformer : < 0.01 %

THD with transformer : < 0.05 %

x-over : 6, 12, 18, 24 dB/oct. slope; Butterworth, Bessel, Linkwitz-Riley

Delay : 3 master delays (2 ms - 900 ms), 4 channel delays (0 ms - 900 ms), delay - increment 21µsec

Data Format : 24-bit linear A/D - D/A conversion, 48-bit processing

Sample Rate : 48 kHz

Display : 122 x 32 dots, graphic LC - Display with LED - backlight

Width : 19 inch 483 mm

Height : 1 RU 43.6 mm

Depth : 374 mm

Weight : 5 kg