RCF MB8G200 8 Ohm

RCF MB8G200 8 Ohm Product Details

Description

RCF MB8G200
The MBG200 is a professional mid-bass woofer featuring very high output and dynamics.

The equipment, used a 2” coil, fibreglass former and copper inside/outside winding, has enabled a very good transient peak response and has allowed good extension on mid-high frequencies. A specially designed M-roll surround guarantee a very low midrange distortion and perfect damping of the spurious resonances. Inverted dust cap for minimum cone break-up.

Applications
The MBG200 is the ideal low frequency transducer for very compact, high efficiency, bass reflex systems where the maximum dynamic is required. Specially designed for 2 way satellite systems.

- 1.5-inch, fiber glass former, copper voice coil

- 400 Watt continuous program power handling

- 94 dB Sensitivity

- 60 Hz - 4 kHz Frequency range

- Exponential, high strength

- M-roll damped surround

Features:

• Nominal Diameter: 200/8 mm/inch
• Rated Impedance: 8 Ohm
• Program Power: 400 Watts
• Power handling capacity: 200 Watts
• Sensitivity 1W, 1m: 94 dB
• Frequency Range 60-4000 Hz
• Effective Piston Diameter: 165/6.5 mm/inch
• Maximum Excursion Before Damage: 30/1.2 mm/inch
• Minimum Impedance: 6.2 Ohm
• Voice Coil Diameter: 51/2 mm/inch
• Voice Coil Material: Copper
• Voice Coil Winding Depth: 16/0.6 mm/inch
• Number of layers: 2
• Kind of layer: Outside
• Thickness Top Plate Depth: 8/0.3 mm/inch
• Cone Material: No pressed pulp
• Cone Design: Curved
• Surround Material: Polycotton
• Surround Design: M - roll
• Resonance frequency: Fs 76 Hz
• DC resistance: Re 4.8 Ohm
• Mechanical factor: Qms 3.7
• Electrical factor: Qes: 0.37
• Total factor: Qts 0.33
• BL factor: BL 12.5 T - m
• Effective Moving Mass: Mms 25 gr
• Equivalent Cas air load: Vas 11 liters
• Effective piston area: Sd 0.021 m2
• Max. linear excursion: Xmax 6.0 mm
• Voice - coil inductance @ 1KHz: Le1k 1.4 mH
• Half-space efficiency: Eff 1.26 %
• Overall Diameter: 239/9.4 mm/inch
• Bolt Circle Diameter: 221 mm
• Bolt Hole Diameter: 6.4/0.3 mm/inch
• Front Mount Baffle Cut-out: 184/7.24 mm/inch
• Rear Mount Baffle Cut-out: 184/7.24 mm/inch
• Depth: 95/3.7 mm/inch
• Volume occupied by the driver: 0.08 liters/ft3
• Net Weight: 3.1/6.8 Kg/lbs
• Shipping Weight: 3.3/7.3 Kg/lbs