Rode Wireless GO II Single

Rode Wireless GO II Single Product Details

Description

Digital wireless microphone system

Ultra-compact complete system for all content creators who travel alone. The Wireless GO II Single consists of a transmitter and a receiver module. The transmitter module already has a microphone optimally tuned for voice transmission. The receiver module has an analog 3.5 mm TRS output for cameras and a digital USB-C output for Mac/PC, smartphone and iPhone.

The operation is very simple. To operate, all you have to do is turn on the two modules and they will connect automatically. Signal quality is at its finest, both analog and digital: crystal clear and ready to transmit immediately. The transmitter and receiver have an internal battery that lasts for at least four hours. The Wireless GO II system has a range of 200 (!) meters with a clear line of sight. Included are a short 3.5mm TRS cable, 2 fur windshields, two USB-C to USB-A cables, and a neoprene carrying case.

The TXv transmitter module

The 4x4 cm small transmitter module has a clip on the back, with which it can be conveniently attached to clothing - preferably to the collar or lapel. In case the module is too conspicuous in the picture, you can use the 3.5 mm TRS jack on the side and connect an external microphone there, for example the Lavalier GO. If you want, you can also record the audio signal directly in the transmitter module itself as a backup. For this onboard recording function, the module has a memory chip that is sufficient for over 40 hours of audio. For undisturbed outdoor recordings, you should always use the included fur windshield. It can be conveniently attached to the transmitter module with its bayonet catch.

The RX receiver module

The receiver module can be easily attached to the hot shoe of the camera. The module is then connected to the camera's microphone input via the supplied TRS cable. Using a suitable USB cable, you can also output the signal digitally to a computer or an Android or iOS device. For the latter, the RØDE SC15 or SC16 cables are suitable. The two buttons on the front can be used to select the output mode, mute the transmitter module, and reduce the output level by a flat 12 dB or 24 dB. The LC display shows the output mode, level and charge status of the receiver and transmitter. If required, you can also activate the safety mode in the receiver module, whereby the signal is output both at full level (TRS peak) and reduced by 20 dB (TRS ring). If an unexpectedly loud sound source on the main track now distorts audibly, you can simply fall back on quieter, undistorted Safety track in post-processing at this point.

Features:

• Ultra-compact, easy to use
• Toll-free and registration-free 2.4 GHz band
• Analog 3.5mm TRS output for cameras, switchable level adjustment
• Digital USB-C output for Mac/PC, smartphone*, iPhone*
• TX terminal transmitter with integrated microphone (spherical capsule)
• 3.5 mm TRS jack for external microphone
• 40 hours of onboard recording possible in the transmitter module
• Range: 200 m (free line of sight)
• 2-channel receiver RX for clip-on or flash shoe mounting
• Safety channel mode (-20 dB) can be activated
• Power supply: internal LiPo battery (TX and RX)
• battery capacity: up to 7 hours, charging via USB-C socket
• incl. 3.5 mm TRS connection cable SC5 and 2x USB-C to USB-A cable
• incl. 2x fur windshield and neoprene carrying case
• Dimensions: 46 x 44x 19 mm (per module)
• weight: 32 g (per module)
• compatible with RØDE Connect and RØDE Central (free software/app)

Technical data:

Radio link:

• Transmission: 2.4 GHz band
• Range: up to 200 m (free line of sight)

Transmitter:

• internal microphone: miniature condenser capsule
• Polar pattern: omnidirectional
• Limiting sound pressure level: 100 dB SPL (1 kHz @ 1 m)
• self-noise: 22 dBA
• Frequency response internal microphone: 50 Hz - 20 KHz
• input for external microphone: 3.5 mm TRS (mono)
• max. input level (3.5 mm jack): -20 dBV
• preamplification for external microphone: +20 dB
• Power supply: built-in LiPo battery (up to 7 hours)
• Charging: via USB-C jack
• Dimensions (WDH): 45.3 x 44.0 x 18.3 mm
• Weight: 30 g

Receiver:

• Level switch (pre-attenuation): 0 dB, -12 dB, -24 dB
• Analog output: 3.5 mm TRS jack (two-channel)
• Digital output: USB-C
• Computer system requirements: Windows 10 or later or Mac OS 10.11 or later
• Power supply: LiPo battery (up to 7 hours) or USB
• Charging: via USB-C socket
• Dimensions (WDH): 45.5 x 44.0 x 18.3 mm
• Weight: 32 g