Product information at 08/10/2026, 01:20
|
159.00 €incl. VAT | incl. Shipping Cost
|
Are you looking for a professional solution to run previously recorded guitar, bass, or audio signals through your favorite pedals and amplifiers after the fact? Then the Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording is an extremely practical tool for anyone who wants to stay flexible during recording and not lock in the final sound right at the time of recording. Especially in the studio, in a home recording setup, or during creative productions, re-amping is one of the most exciting ways to later shape a dry track into exactly the sound that perfectly suits the song.
The Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording was designed to process a signal from an audio interface so that it can be fed into guitar pedals, effects chains, or amplifiers. This is particularly important because line signals from interfaces have different level and impedance characteristics than traditional guitar signals. Without proper adjustment, the sound can come across as unnatural, too harsh, too loud, or too prone to noise. This is exactly where the Canvas Re-Amp ensures clean, practical signal conversion.
Whether you want to reroute a DI guitar track through a tube amp, shape a bass signal using overdrive and compressor pedals, or creatively process synthesizers, drums, and samples—the Walrus Audio Canvas Re-Amp reamping box for studio and recording opens up a world of possibilities. It operates passively, requires no power supply, and offers a very well-thought-out set of features for modern recording workflows, including a volume control, ground lift, phase switch, mute function, and high-pass filter.
Walrus Audio is a brand particularly well-known among guitarists and producers for its creative effects units and high-quality pedals. The company combines original design with practical technology and caters to musicians who aren’t just looking for standard solutions, but need tools with character and high sonic quality. The Canvas series demonstrates that Walrus Audio not only develops effects pedals but also offers professional studio tools for signal routing, recording, and re-amping.
The Walrus Audio Canvas Re-Amp re-amping box for studio and recording fits perfectly with this philosophy. It comes in pedal format and therefore integrates particularly well into existing guitar and studio setups. Anyone who already works with pedalboards will immediately appreciate its compact design. At the same time, it’s not just an ordinary effects pedal, but a specialized re-amping tool that bridges the gap between the audio interface and guitar equipment.
The Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording is manufactured in the U.S. This underscores the device’s professional standards and aligns with the brand’s commitment to high quality. Of particular importance are the specially wound custom transformers. These transformers are designed for optimal sound quality and low total harmonic distortion. This ensures that the signal isn’t unnecessarily colored or degraded, but instead passes cleanly and musically into the subsequent effects or amplifier chain.
With this re-amp, Walrus Audio targets users who want to remain flexible during production. Instead of having to determine the final amp sound immediately during recording, a clean DI signal can be recorded first. Later, this signal can be routed through various pedals, amplifiers, or creative hardware chains using the Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording. This saves time, increases control, and opens up additional possibilities in mixing or sound design.
The Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording is a passive re-amp unit in a compact pedal format. Its primary function is to adjust the impedance and level of an audio signal from an audio interface so that it can be processed as if it were a signal from an actual instrument. This is particularly important when re-amping electric guitars, as guitar amplifiers and pedals typically expect a signal coming directly from a guitar. An interface output, however, delivers a different signal level and different electrical characteristics.
With the Canvas Re-Amp, you can process previously recorded audio signals retrospectively using your preferred combination of pedals and guitar amps. So you can first record a dry DI track and decide later which amp, overdrive pedal, fuzz, compressor, or modulation effect best suits the song. This workflow is particularly popular because it separates musical performance from sound design decisions. The best performance can be preserved while the sound is further refined later.
The inputs on the Walrus Audio Canvas Re-Amp reamping box for studio and recording consist of a 6.3-mm mono jack and a female XLR connector. This allows the device to be flexibly integrated into various studio setups. The output signal is routed via a 6.3-mm mono jack. From there, it can be fed directly into pedals, a pedalboard, a guitar amplifier, a bass amplifier, or other instrument-specific input stages.
A particularly important feature is the specially wound custom transformers. Transformers play a crucial role in re-amping because they not only contribute to signal transmission but can also help ensure clean electrical matching and decoupling. In the Walrus Audio Canvas Re-Amp re-amping box for studio and recording, these transformers are designed for high sound quality and low distortion. The goal is a clear, musical signal that drives your pedals and amplifiers naturally.
The output volume is adjustable via a volume control. This feature is particularly important in everyday re-amping because different interfaces, audio tracks, and effects chains can operate at very different levels. With the volume control, you can precisely adjust the signal level to ensure your pedalboard or amplifier is driven appropriately. A level that’s too high can quickly cause unnatural clipping, while a level that’s too low can sound weak. The adjustable output volume helps you find the right operating range.
To prevent ground loops, the Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording features a switchable ground lift. Ground loops can occur when an audio interface, computer, amplifier, and other devices are connected to each other and different ground references are created. This is a common problem, especially with re-amping, because studio equipment and guitar amplifiers are combined. The ground lift switch offers a practical way to reduce annoying hum.
In addition, the unit features a phase switch. This allows you to reverse the phase of the output signal. This is particularly helpful when combining multiple signals, such as a direct signal and a mic’d amp sound. Phase issues can cause certain frequencies to sound thin, hollow, or lacking in power. With the phase switch, you can quickly check the signal’s phase alignment and adjust it as needed.
Another practical feature is the mute switch. It allows you to mute the signal without having to unplug cables or adjust volume controls. This is very convenient in everyday studio work, such as when reconnecting pedals, adjusting amp settings, or setting up a microphone position. The mute switch gives you greater control and protects against unwanted noise while you work.
The HPF switch activates a high-pass filter. A high-pass filter can reduce low-frequency components that may be distracting or unnecessary in a re-amping context. This can be particularly helpful for guitar tracks, effects chains, or creative sound design applications. It allows for better control over low-frequency rumble, unnecessary bass punch, or uncontrolled sub-frequencies. This feature can be especially useful when the reamped signal needs to sit properly in the mix later on.
The linear frequency response from 20 Hz to 20,000 Hz demonstrates that the Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording is designed for wide and clean signal transmission. This frequency range covers the audible spectrum and ensures that the signal is not artificially limited. This means that sound shaping is primarily left to the connected pedals, amplifiers, and speakers.
The passive design is another major advantage. The Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording requires no power supply. This means neither a power adapter nor a battery is needed. As a result, the device is exceptionally easy to use. Simply connect the interface to the input, route the output into your effects or amp chain, and adjust the level. Fewer power sources also mean fewer potential sources of error and easy integration into mobile or fixed setups.
With dimensions of 12.1 x 6.6 x 3.6 cm, the device is compact enough for studio desks, pedalboards, or mobile recording bags. Weighing 345 g, it feels sturdy yet remains light enough for transport. This combination of compact design and professional functionality is particularly practical for musicians who switch between the studio, rehearsal room, and live setups.
As a re-amp for electric guitar, the Walrus Audio Canvas Re-Amp re-amping box for studio and recording is a particularly obvious choice, but it can also be used creatively with other sound sources. Bass tracks, synthesizers, drum loops, or samples can be routed through pedals and amplifiers to create organic distortion, spatial effects, modulations, or unusual sound textures. This makes the unit not only a technical aid but also a creative tool for sound design and production.
The Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording is recommended for anyone who wants maximum flexibility when recording. If you want to record guitar or bass tracks dry at first and determine the final amp or pedal sound later, this device is a very useful addition. It allows you to preserve a good performance and shape the sound afterward using different amplifiers, pedals, or effects chains.
For home recording users, the Canvas Re-Amp is particularly appealing because it’s easy to use and requires no power supply. You can work with an audio interface, record DI tracks, and later route them through real guitar gear. This makes a small studio significantly more flexible. Even if you only own one amplifier, you can test different microphone positions, pedal combinations, and gain settings without having to re-record the performance.
For professional studios, the Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording is also worth considering. The custom transformers, linear frequency response, ground lift, phase switch, and mute function offer exactly the control needed for everyday studio work. Especially when you need to switch quickly between different setups, the combination of pedal format and a clear user interface is very convenient.
Creative producers and sound designers also benefit from this re-amper. Re-amping is by no means limited to guitars. Running drum loops through fuzz pedals, synths through analog delays, vocals through guitar amps, or samples through modulation effects can create very distinctive timbres. The Walrus Audio Canvas Re-Amp re-amping box for studio and recording makes such experiments easier because it processes the interface signal to suit hardware typical of the instrument.
If you’re looking for a compact, high-quality, passive re-amping tool that’s made in the U.S. and equipped with practical studio features, the Walrus Audio Canvas Re-Amp Reamping Box for Studio and Recording comes highly recommended. It offers clean signal conversion, flexible connectivity options, adjustable output level, and helpful switches for ground lift, phase, mute, and high-pass filter. This makes it a professional tool for anyone who wants to bring their recordings to life later on using real pedals and amplifiers.
|
Musikhaus Korn - Division of KORN e.K. KORN e.K. Inhaber: Denis Korn Thomas-Müntzer-Straße 4 04758 Oschatz Deutschland USt-ID-Nr.: DE 165 839 418 eingetragen im Handelsregister des Amtsgerichtes Leipzig Handelsregisternummer HRA 16661 WEEE-Reg.-Nr. DE 12745699 |
Business hours
|
