Which cartridge systems are compatible with the Ortofon Q-Bert stylus?

This replacement stylus is intended for Ortofon Q.Bert cartridges based on the OM and Concorde MKI design. It is best used with the matching Q.Bert cartridge body so that the sound, output level and tracking performance correspond to the intended configuration. It is not compatible with structurally different systems such as Concorde MKII, VNL or 2M.

Which DJ techniques is the Q-Bert replacement stylus designed for?

The stylus was developed specifically for scratching, back-cueing and demanding turntablism. Its spherical profile with an 18 µm tip radius supports stable groove tracking during rapid forward and backward movements. It can also be used for conventional mixing, although its mechanical and tonal design is primarily focused on DJ performance.

Which tracking force should be used?

The permitted tracking-force range is 2 to 4 g, with 3 g or 30 mN recommended. Correct adjustment is important for reliable tracking and for limiting unnecessary record wear. The maximum value should not be exceeded, particularly because the Q-Bert cantilever is designed to be comparatively flexible.

What sound characteristics does the Ortofon Q-Bert stylus provide?

The Q.Bert system delivers a high output level of 11 mV and a prominent midrange that helps cuts and scratches remain clearly audible. Its upper frequencies are slightly more restrained, which can make surface noise from worn records less dominant. Gain should be adjusted carefully when using mixers or preamps with limited input headroom to prevent clipping.

What is included, and how is the stylus replaced?

The package contains one white Q-Bert replacement stylus; a complete cartridge and headshell are not included. On a compatible system, the existing stylus assembly can be carefully pulled off and the replacement fitted by hand. Tools are normally unnecessary. Distortion, repeated mistracking or visible damage can indicate that the setup should be checked or the stylus replaced.

Ortofon needle Q-Bert

Name: Ortofon needle Q-Bert
Brand: Ortofon
SKU: 151868
Price: 48.00 EUR
Availability: InStock
Rating: 5.0 (4 reviews)

EUR 48.00

incl. VAT plus

on stock
Delivery time: 1 ‐ 2 business days (Germany)

Quantity discount:

buy 1
EUR 48.00 / piece
2 or more
EUR 44.00 / piece

- or -

Create individual set and save money

Check availability in store:

Oschatz: can be picked up immediately

Rating

(4)

Brand:

Ortofon

Model:

151868

EAN:

5705796140309

Shipping Weight:

0.01 kg

Shipped via:

Goods Mail

Unit:

piece

Secure Shopping:

Trusted Shops certified
Fast delivery times
1 month right of withdrawal
Buyer protection
Secure SSL data encryption

Share with friends:

EUR 49.00

Ortofon Nadel Made from Scratch

2 piece on stock

EUR 69.00

Ortofon Nadel Digitrack Limited Edition

(1)

3 piece on stock

EUR 65.00

Ortofon needle Nightclub E

(8)

5 piece on stock

EUR 55.00

Ortofon needle Nightclub S

Ortofon needle Elektro

(2)

4 piece on stock

EUR 45.00

Ortofon needle Scratch

Ortofon needle Digitrack

(3)

4 piece on stock

EUR 48.00

Ortofon Nadel Cocoon LE

(3)

4 piece on stock

EUR 39.00

Ortofon needle Digitrack green

1 piece on stock

Ortofon needle Q-Bert Product Details

Q.Bert Replacement Stylus

Concorde Q.Bert co-designed by DJ Q.Bert for scratch and back-cueing.

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Features:

High tracking ability, unsurpassed handling
Ultra high output!
Low wear characteristics that literally put it in a class of its own

Technical Specificatons:

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Frequency response - 20-20.000 Hz -3 dB
Tracking ability at 315 Hz at recommmended tracking force - 980 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
Cartridge weight - 18,5 g
Compatible with cartridges - Q.Bert

Specs:

Type: Stylus
Theme: DJ Equipment
Stylus type: Spherical
Color: White

Further links:

Print View

Question:	Which cartridge systems are compatible with the Ortofon Q-Bert stylus?
Answer:	This replacement stylus is intended for Ortofon Q.Bert cartridges based on the OM and Concorde MKI design. It is best used with the matching Q.Bert cartridge body so that the sound, output level and tracking performance correspond to the intended configuration. It is not compatible with structurally different systems such as Concorde MKII, VNL or 2M.
Question:	Which DJ techniques is the Q-Bert replacement stylus designed for?
Answer:	The stylus was developed specifically for scratching, back-cueing and demanding turntablism. Its spherical profile with an 18 µm tip radius supports stable groove tracking during rapid forward and backward movements. It can also be used for conventional mixing, although its mechanical and tonal design is primarily focused on DJ performance.
Question:	Which tracking force should be used?
Answer:	The permitted tracking-force range is 2 to 4 g, with 3 g or 30 mN recommended. Correct adjustment is important for reliable tracking and for limiting unnecessary record wear. The maximum value should not be exceeded, particularly because the Q-Bert cantilever is designed to be comparatively flexible.
Question:	What sound characteristics does the Ortofon Q-Bert stylus provide?
Answer:	The Q.Bert system delivers a high output level of 11 mV and a prominent midrange that helps cuts and scratches remain clearly audible. Its upper frequencies are slightly more restrained, which can make surface noise from worn records less dominant. Gain should be adjusted carefully when using mixers or preamps with limited input headroom to prevent clipping.
Question:	What is included, and how is the stylus replaced?
Answer:	The package contains one white Q-Bert replacement stylus; a complete cartridge and headshell are not included. On a compatible system, the existing stylus assembly can be carefully pulled off and the replacement fitted by hand. Tools are normally unnecessary. Distortion, repeated mistracking or visible damage can indicate that the setup should be checked or the stylus replaced.