NEW LD Systems MAUI 44 G3 MIX Column PA System, 4-Way Cardioid with Digital Mixer

LD Systems MAUI 44 G3 MIX Column PA System, 4-Way Cardioid with Digital Mixer

Are you looking for a high-performance column PA system that combines professional sound reinforcement, an integrated digital mixer, and controlled sound dispersion? The LD Systems MAUI 44 G3 MIX 4-Way Cardioid Column PA System with Digital Mixer offers a comprehensive solution for demanding live applications. With 3,600 watts of peak power, 1,800 watts RMS, and a maximum sound pressure level of 133 dB, this fully active 4-way system combines high power reserves with versatile audio processing capabilities.

Features include an integrated 8-channel digital mixer with effects, remote control via the MAUI MIX app, and SysLink support, as well as a powerful 15-inch subwoofer and a two-piece speaker column. A total of 14 neodymium midrange drivers and four compression drivers ensure the reproduction of mid and high frequencies. The passive cardioid design reduces rear sound radiation from the column by up to 18 dB and enables targeted sound reinforcement of the audience.

LD Systems MAUI 44 G3 MIX – Professional Sound Reinforcement with Integrated Mixing Console

With the MAUI 44 G3 MIX, LD Systems offers an active column speaker system that combines the features of the MAUI series with extensive digital mixing functions. The system was developed for solo performers, duos, bands, and event service providers looking for powerful speaker technology and flexible signal processing in a single solution.

The LD Systems MAUI 44 G3 MIX 4-way cardioid column PA system with digital mixer features a fully active 4-way architecture. The different speaker groups are driven by dedicated amplifier channels. This allows for precise tuning of the low-, mid-, and high-frequency reproduction within the system.

The black version combines a birch multiplex subwoofer with a durable polyurea coating and powder-coated aluminum columns. The enclosure design is engineered for rugged handling during regular transport and use.

8-channel digital mixer for flexible live applications

A key feature of the MAUI 44 G3 MIX is its integrated 8-channel digital mixer. It offers eight XLR/jack combo inputs, six of which are equipped with microphone preamps. 48-V phantom power is available for compatible microphones.

This allows various audio signals to be connected directly to the column PA system and processed. For sound shaping, a fully parametric 5-band equalizer, dynamics processing, digital effects, reverb, delay line, and presets are available.

The integrated signal processing makes it possible to adapt different input signals to the requirements of a live performance. A footswitch input complements the digital mixer’s control options.

Four monitor outputs and one system output

For flexible signal distribution, the MAUI 44 G3 MIX features a total of five outputs. These include four separate monitor outputs and one system output. The connections are three-pin XLR outputs.

The monitor outputs are particularly useful for bands and live musicians, as they can be used to provide the necessary monitor signals. The integrated mixer thus not only processes the audio signals but also offers options for distributing them within a sound reinforcement setup.

MAUI MIX App and Color Display for Convenient Operation

The built-in digital mixer can be controlled either directly on the system or wirelessly via a compatible mobile device. An integrated color display is available for on-device operation.

Alternatively, all mixer and system settings can be controlled via the free MAUI MIX app. The app is available for iOS and Android and enables remote control of the corresponding functions.

The LD Systems MAUI 44 G3 MIX 4-way cardioid column PA system with digital mixer thus offers a variety of control options. While the color display provides direct access, the app adds a wireless alternative to the operation.

SysLink for Stereo Operation and Joint Control

The integrated SysLink function allows two MAUI 44 G3 MIX systems to be connected to each other. This allows you to set up a stereo configuration in which both systems are controlled together.

When connected via SysLink, a total of 16 mixer channels are available. Control is centralized, allowing access to all channels on both systems.

This expansion option is particularly useful when a single column PA system needs to be supplemented with a second unit. SysLink combines stereo operation with the digital mixing functions of both devices.

15-inch neodymium subwoofer with deep bass down to 34 Hz

For reproducing low frequencies, the MAUI 44 G3 MIX features a powerful 15-inch neodymium woofer. It is equipped with a 4-inch voice coil and operates in a bass-reflex enclosure.

The frequency response of the entire system extends down to 34 Hz at -10 dB. This enables the MAUI 44 G3 MIX to deliver powerful bass reproduction that captures even the lowest musical frequencies.

The bass reflex ports have been specially optimized for airflow. This design reduces air turbulence and unwanted airflow noise, supporting precise bass reproduction even at high volume levels.

The subwoofer enclosure is made of 18 mm thick birch plywood and features a durable polyurea coating. A steel front grille completes the design. Four ergonomic carrying handles make it easy to move the subwoofer.

14 neodymium midrange drivers for balanced midrange

The two-piece speaker column of the MAUI 44 G3 MIX contains a total of 14 midrange drivers, each with a diameter of 3.5 inches. All drivers are equipped with neodymium magnets and 1-inch voice coils.

Horn-loaded midrange drivers are used in the lower column section. This design increases efficiency and enables high dynamic headroom as well as powerful reproduction in the vocal range.

Balanced midrange reproduction plays a particularly important role when reproducing vocals and other midrange-heavy signals. The driver arrangement has therefore been optimized for coherent dispersion characteristics.

Four compression drivers with BEM-optimized waveguides

For the high-frequency range, the MAUI 44 G3 MIX uses four 1-inch compression drivers with waveguides. The upper column element also features newly developed phase plugs and BEM-optimized waveguides.

These components support controlled and uniform dispersion of high frequencies. Together with the midrange drivers, they produce a finely tuned sound reproduction.

The horizontal dispersion angle is 120 degrees, while the vertical dispersion is designed for 25 degrees. As a result, the column system directs the sound precisely toward the intended audience area.

Passive cardioid design with up to 18 dB of rear attenuation

A distinctive feature of the MAUI 44 G3 MIX is the passive cardioid design of the speaker column. This directs sound energy primarily toward the audience, while significantly reducing rear radiation.

In the frequency range from 100 Hz to 1 kHz, the design achieves rear attenuation of up to 18 dB. As a result, less unwanted sound reaches the area behind the loudspeaker system.

This feature is particularly useful at live events where musicians and microphones are positioned behind or next to the loudspeaker system. The directional dispersion supports controlled sound distribution.

Expandable with a second MAUI 44 G3 subwoofer

For additional bass output, the MAUI 44 G3 MIX can be combined with a second MAUI 44 G3 or MAUI 44 G3 MIX subwoofer. Depending on the setup, various options are available.

Additional bass impact from a second subwoofer

If the additional subwoofer is aimed forward, the sound pressure in the bass range can be increased by 6 dB, according to the manufacturer. This configuration is ideal when a higher low-frequency level is required for a sound reinforcement application.

Cardioid subwoofer setup for directional bass reproduction

Alternatively, the second subwoofer can be directed toward the rear. In combination with the corresponding cardioid preset, the bass dispersion can be precisely controlled.

With this configuration, sound energy in the low-frequency range is directed more toward the audience and reduced behind the system. This allows the column’s cardioid principle to be extended to bass reproduction as well.

3,600 watts of peak power and second-generation DynX DSP

The integrated Class D power amplifier delivers an RMS output power of 1,800 watts and a peak power of 3,600 watts. The maximum sound pressure level is 133 dB SPL.

The fully active 4-way architecture utilizes separate driver groups and corresponding amplifier channels. The crossover frequencies are 200 Hz, 700 Hz, and 1,800 Hz.

For digital signal processing, LD Systems uses the second-generation DynX DSP. It features advanced peak, RMS, and thermal limiters that ensure controlled playback even at high volumes.

The frequency response ranges from 37 Hz to 20,000 Hz at -6 dB and from 34 Hz to 20,000 Hz at -10 dB. The AD/DA converters operate at a sampling rate of 48 kHz and the specified bit depths of 32 and 24 bits, respectively. The minimum signal-to-noise ratio is 104 dB.

Bluetooth Audio Streaming and Versatile Connectivity

The MAUI 44 G3 MIX supports wireless audio streaming via Bluetooth 4.2. The SBC audio codec is used. This allows compatible audio sources to be connected to the system without additional audio cables.

Eight balanced XLR/jack combo inputs are available for wired signals. Six of these inputs feature microphone preamps. The built-in 48-volt phantom power supply enables the use of compatible microphones.

Together with the four monitor outputs, the system output, and the built-in mixing functions, the MAUI 44 G3 MIX offers a comprehensive range of connections for various live applications.

Quick Setup and Rugged Enclosure Design

Like the other models in the MAUI series, the MAUI 44 G3 MIX is designed for easy setup. The column elements can be connected without separate cables between the components. Automatic column detection complements the setup concept.

The two-piece speaker column is made of powder-coated aluminum. It measures 103 mm wide, 1,626 mm tall, and 136 mm deep. The column unit weighs 12 kg.

The subwoofer measures 434 mm wide, 634 mm tall, and 638 mm deep. It weighs 36.24 kg. Four ergonomic carrying handles facilitate transport.

When fully assembled, the system reaches a height of 2,259 mm. The total width is 434 mm and the depth is 638 mm. The total weight is 48.3 kg.

Power is supplied via a mains connection for 100 to 240 volts AC at 50 to 60 Hz. The power consumption is 900 watts. The system uses a switching power supply and convection cooling. The required power cord is included.

Recommended Purchase: LD Systems MAUI 44 G3 MIX 4-Way Cardioid Column PA System with Digital Mixer

The LD Systems MAUI 44 G3 MIX 4-way cardioid column PA system with digital mixer is recommended for solo performers, duos, bands, and event service providers looking for a professional sound reinforcement solution with integrated mixing functions.

The combination of 3,600 watts of peak power, a 15-inch neodymium subwoofer, 14 midrange drivers, and four compression drivers enables powerful sound reproduction with high headroom. The passive cardioid design complements the speaker technology with targeted sound dispersion and reduced rear sound energy.

Of particular interest is the integrated 8-channel digital mixer with extensive effects, four monitor outputs, and remote control via the MAUI MIX app. SysLink also allows two systems to be connected into a single stereo configuration with a total of 16 mixer channels.

If you want to combine powerful speaker technology, flexible mixing functions, and ease of use in a single active column PA system, the LD Systems MAUI 44 G3 MIX offers a comprehensive set of features. The black version combines the technical concept with a robust and understated enclosure design.

Features:

• Powerful 4-way cardioid column PA system
• 3,600 W peak power / 133 dB max. SPL
• 15" bass-reflex subwoofer with powerful low-end down to 34 Hz
• 14 × 3.5" neodymium midrange drivers for balanced mids
• 4 × 1" compression drivers with waveguides for precise and clear highs
• 8-channel digital mixer with onboard effects and footswitch input
• Remote control via the free MAUI MIX app (iOS and Android)
• Connect two systems via SysLink® for stereo use and unified control
• Cardioid column with up to 18 dB attenuation of rear radiation (100 Hz – 1 kHz)
• BEM-optimized waveguides and phase plugs for controlled, uniform dispersion
• Horn-loaded midrange drivers for a particularly coherent wavefront
• Aerodynamically optimized bass-reflex design for extended low-frequency response and reduced port noise
• Can be paired with a second MAUI 44 G3 (MIX) SUB for added depth or a cardioid subwoofer setup
• DynX® DSP (Gen. 2) with advanced limiters for distortion-free sound even at maximum volume
• Wireless audio streaming via Bluetooth®
• Subwoofer with four ergonomic carrying handles for easy transport
• Quick and easy setup with wireless connection and automatic column detection
• Robust subwoofer made of birch plywood with a polyurea coating and powder-coated aluminum columns

Technical Specifications:

• General:
  • Manufacturer: LD Systems
  • Model: MAUI 44 G3 MIX
  • Product type: Active column PA system with digital mixer
  • Type: Active
  • Speaker system: 4-way system
  • Peak output power: 3600 W
  • RMS Output Power: 1,800 W
  • Amplifier Class: Class D
  • SysLink®: Yes
  • Maximum Sound Pressure Level (Peak): 133 dB
  • Frequency response (-6 dB): 37 Hz – 20,000 Hz
  • Frequency response (-10 dB): 34 Hz – 20,000 Hz
  • Crossover frequencies: 200 Hz / 700 Hz / 1,800 Hz
  • Horizontal coverage angle: 120°
  • Vertical coverage angle: 25°
  • Protection features: Limiter, overheating protection
  • Color: Black
• Connections and inputs:
  • Number of inputs: 8
  • Input connector type: XLR combo jack
  • Input signal type: Balanced
  • Number of mic/line inputs: 6
  • Connection type for mic/line inputs: XLR combo jack
  • Phantom power: 48 V
  • Number of line inputs: 8
  • Line Input Connector Type: XLR combo jack
  • Number of Outputs: 5
  • Output Connector Type: XLR, 3-pin, male
  • Output configuration: 4 monitor outputs, 1 system output
• Digital mixer and signal processing:
  • Built-in mixer: Yes
  • Mixer channels: 8
  • Audio processing: Delay line, digital effects (DFX), dynamics, presets, reverb, fully parametric 5-band EQ
  • DSP: DynX® DSP (Generation 2)
  • Controls: Built-in color display and MAUI MIX app
  • App compatibility: iOS and Android
  • Footswitch input: Yes
  • AD/DA converter bit depth: 32-bit, 24-bit
  • AD/DA converter sample rate: 48 kHz
  • Minimum Signal-to-Noise Ratio (SNR): 104 dB
• Bluetooth:
  • Bluetooth Version: 4.2
  • Supported audio codec: SBC
  • Receiver (client): No
  • Transmitter (host): No
• Woofer:
  • Size: 15 inches
  • Manufacturer: Custom Made
  • Magnet: Neodymium
  • Voice coil: 4 inches
• Midrange driver:
  • Size: 3.5 inches
  • Quantity: 14
  • Manufacturer: Custom Made
  • Magnet: Neodymium
  • Voice coil: 1 inch
• Tweeter:
  • Driver size: 1 inch
  • Quantity: 4
  • Design: Compression driver with waveguide
  • Manufacturer: Custom Made
  • Magnet: Neodymium
  • Voice coil: 1 inch
• Power supply and cooling:
  • Operating voltage: 100–240 V AC / 50–60 Hz
  • Power supply type: Switch-mode power supply (SMPS)
  • Power consumption: 900 W
  • Power connection: powerCON®
  • Fuse: T10AL/250 V
  • Cooling system: Convection cooling
• Satellites / Columns:
  • Number of handles: 2
  • Enclosure material: Aluminum
  • Surface finish: Powder-coated
  • Width: 103 mm
  • Height: 1626 mm
  • Depth: 136 mm
  • Weight: 12 kg
• Subwoofer:
  • Design: Bass reflex
  • Number of handles: 4
  • Enclosure material: Birch plywood
  • Plywood thickness: 18 mm
  • Surface finish: Polyurea
  • Front grille material: Steel
  • Width: 434 mm
  • Height: 634 mm
  • Depth: 638 mm
  • Weight: 36.24 kg
• Environmental conditions:
  • Ambient temperature: 0 °C to 40 °C
  • Maximum humidity (non-condensing): 80 %
• Overall Dimensions and Weight:
  • Width: 434 mm
  • Height: 2259 mm
  • Depth: 638 mm
  • Total weight: 48.3 kg
• Package contents:
  • Power cord

Further links:

• Print View