Dynacord MADRAS M 15
You will surely find a current product that meets your needs, because we are striving to expand our extensive product range.
- Related Products
- more of Dynacord
- all articles from the category Stage Monitors Active
Dynacord MADRAS M 15 Product Details
The MADRAS M 15 is equipped with an Electro-Voice ND-6 neodymium driver with a 3-inch voice coil for the HF range and a 15 inch Electro-Voice EVX 155 for the LF range. These are driven by the integrated crossover (124 Hz, Linkwitz-Riley 24 dB/Octave) with signal processing and a two-way power stage with separate LF- and HF-channels. A slide switch allows you to select between "Full-range” and "Mid-High” operation modes. A high-efficiency Class H power amplifier is used for the low frequency range — a decision that results in reduced thermal power loss, lower power consumption and a notable reduction in the overall weight of the unit. A separate power amplifier is used for the higher frequencies. Both power stages are convection cooled, thereby eliminating annoying fan noise. The frequency response of the MADRAS M 15 is extremely linear. The horizontal and vertical radiation patterns are also extraordinarily uniform, which means that the MADRAS M 15 is far less susceptible to feedback than comparable enclosures and therefore the ideal choice also for highpowered monitoring applications.
Features
Active 2-way FULLRANGE cabinet with a 15 inch LF- and 3 inch voice-coil HF-driver
Integrated Hi-Power Class H amps with 460W for the LF- and 140W for the HF-range
Switch to MID-HIGH operation for monitor or delay applications
Wide horizontal coverage (80 degree)
Voice Coil Tracking Protection for maximum SPL with maximum operational safety
Asymmetric enclosure design for optimum PA and monitor applications
Safe and lockable PowerCon mains connection and through socket
Extensive range of yokes and flying accessories with integrated rigging rails
Specs
SPL 1W/1M : 100 dB
Max. SPL 1m (Cont. Prog.) : 128 dB
Frequency Range (-10 dB) : 50Hz to 19kHz
Component Low (Transducer) : Electro-Voice EVX 155 (359561)
Component High (Transducer) : Electro-Voice ND6-16 Driver (361663)
High Frequency Horn : Electro-Voice HP8055 80x55 degree (345799)
Outfit : Cabinet surface black varnished
Max. Dynamic Output Power(IHF-A): LO : 540 W
Max. Dynamic Output Power(IHF-A): HI : 160 W
Max. Continuous Output Power: LO : 460 W (THD=1%, 400 Hz)
Max. Continuous Output Power: HI : 140 W (THD=1%, 4kHz)
Power Amplifier Design : High efficiency Class H
THD+N, rated : <0.01 %
Input Impedance (Balanced) : 20 kohms
Crossover Mode Switch : Fullrange/Mid-High 24dB/Octave, Linkwitz Riley,124 Hz
Level Control : -infinity to +6 dB
Cooling : Convection cooled, passive
Power Requirements : 100V, 120V, 230V, 240V / 50 Hz - 60 Hz
Width : 430 mm
Height : 630 mm
Depth : 432 mm
Weight : 38 kg
