Hafler P1000

100 Watt 2-Channel Trans•ana Professional Broadcast Amplifier

The perfect solution for broadcast, the P1000 offers an amazing 100 watts of Hafler power from a single rack space. 

Features

Trans•ana patented MOSFET output stage configured for "power gain" allows simpler front end circuitry, dramatically lower cross talk and noise

NOMAD smart protection circuitry that prevents sonic degradation and accurately computes allowable device current for device voltage.

Front Mounted Headphone Jack: low impedance output gives you the convenience to easily monitor your work.

Front Mounted Level Controls: Allow you to easily adjust levels.

Balanced/Unbalanced Inputs: Versatility in connecting any source.

LED Indicators: allow you to monitor the operating status of each channel.

1.75” Rack Mount (1-rack space)

Stereo/Bridged Mono

XLR or 1/4” Balanced Inputs

Gold-Plated RCA Unbalanced Inputs

Barrier Strip Output Terminals

Power, Signal, Clip, Thermal LEDs

Full Range Gain Controls

Headphone Jack

Switchable 115/230 VAC

Chassis/Float Ground Switch

Level Control Security Covers

Serviceable Channel Modules

P1000 Specifications

Power Rating 50 Watts/channel @ 8ohms

  55 Watts/channel @ 4ohms

  110 Watts bridged/mono @ 8ohms

Total Harmonic Distortion (THD) <0.2% (20Hz-20kHz)

Signal-to-Noise 100dB "A" Weighted

Full Power Bandwidth 0.1Hz to 100kHz (+0/–3dB)

Slew Rate 20V/µs

CMRR (Common Mode Rejection Ratio) 70dB at 1kHz

Input Impedance 47k Ohms per phase balanced

Gain –36dB min. / +29dB max.

Input Sensitivity Range 375mV to 3V (@ 8ohms) per phase balanced

  277mV to 3V (@ 4ohms) per phase balanced

Damping Factor 900 (to 1kHz)

  400 (to 10kHz)

  40 (to 100kHz)

Power Consumption 50W / 420mA @ 120VAC (idle power)

  152W / 1.3A @ 120VAC (1/8 power – 8 Ohms)

  260W / 2.2A @ 120VAC (max. power – 8 Ohms)

Indicators Power, Signal, Clipping, Thermal

Dimensions 19"W x 8.375"D x 1.75"H (1-rack space)

  (48.3cm x 21.3cm x 4.45cm)

Net Weight 12 lbs. (5.45kg)

Further links:

• Print View