Neumann KH 750 DSP Subwoofer

The extremely compact Neumann KH 750 DSP is the ideal choice for smaller rooms and smaller studio monitors such as the KH 80 DSP. It features a uniquely flexible 2.0/0.1 Bass Manager that allows the subwoofer to be used in many different system configurations. The rear panel features analog and digital inputs and outputs, four routing modes, and flexible acoustic controls for seamless system integration. The Neumann Control software provides access to many additional functions of the subwoofer. The KH 750 DSP can be used in music, broadcast and post-production studios for tracking, mixing and mastering.

Features:

• Easy to install, compact subwoofer with very low bass response
• DSP engine optimizes sound output to reference class
• Neumann.Control app for iPads® for configuration, adjustment and operation in one system
• THD+N: analog, digital: < -100 dB; < -90 dB
• Free-field frequency response ±6 dB: 16 ... 800 Hz
• Free-field frequency response ±3 dB: 18 ... 750 Hz
• Noise at 10 cm distance (at input gain of 100 dB SPL for 0 dBu): <20 dB(A) SPL
• Sine wave reproduction with THD < 0.5 % in 1 m in half space: 95 dB SPL (>70 Hz)
• Bass capability: Maximum sound pressure level in half space at 3% THD in 1 m (averaged between 50 Hz and 100 Hz): 105.0 dB SPL
• Analog inputs: 2 x XLR: analog, electronically balanced
• Analog input impedance: >13k Ohm
• Max. Input level: < +24 dBu
• Common mode rejection (CMRR): > 56 dB @ 15 kHz
• Crosstalk attenuation between channels (1 kHz / same level): < -90 dB; ±0.1 dB
• Volume control: via Neumann.Control software
• Volume control range; resolution: 0 ... -∞ dB; 0.1 dB
• Analog dynamic range; THD+N: 119 dB(A); <0.003% (-90 dB)
• Subwoofer Modes: Right; External Bass Management; 2 x LFE
• Analog outputs: 2 x XLR; analog; electronically balanced
• Input gain control (sensitivity): +2 ... -12 dB
• Output level switch (output level in 1 m relative to 0 dBu input level): 94; 100; 108; 114 dB SPL
• Digital inputs: BNC (75 Ω): AES3; S/P-DIF
• Digital output: BNC (75 Ω): AES3
• Digital converter: Resolution; Technique: 16 ... 24-bit DAC; Δ∑
• Digital converter: Sampling rate: 48 kHz
• Dynamic range A-D-A: >120 dB(A)
• Dynamic range D-A: >123 dB(A)
• Digital sensitivity: -18 dBFS = 100 dB SPL at 1 m
• Latency: 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase)
• Delay: Setting range: 0 ... 100 ms and 2 x 0 ... 20.8 ms
• Delay: Resolution: time; distance: 0.1 ms; 3.44 cm
• Delay: Max. Frames Audio video synchronization (lip sync): 2.5 (40 ms) frames; 3 (33 ms) frames
• Delay: max. distance delay: 2 x 7.16 m
• Controller technology: Digital; active
• Crossover frequency: 80 Hz fixed or 60 ... 100 Hz via Neumann.Control
• Crossover slope: 24 dB/oct; 4th order
• Phase: 0; 45; 90; 135 and 0/180 degree
• Acoustic controller: via Neumann.Control app: 8 x fully parametric IIR filters + globally acting low/high shelf filters
• FIR Phase correction: for the connected analog speakers: linear phase (170 Hz ... 16 kHz; +/- 45°)
• Protection circuit: driver (thermal limiter); electronics (temperature limiter); amplifier (peak limiter, temperature limiter, temperature protection and overvoltage protection); power supply (temperature limiter and overvoltage protection)
• Infrasound filter: frequency; slope: 6.5 Hz; 12 dB/oct.
• Remote control: Neumann.Control software via RJ45 connector with standard IP data
• Display: On, Normal operation: Green LED
• Display: Identification: Amber LED
• Display: Limit / Clip / Error / Protective circuit / Power on mute / Power off mute: Red LED
• Display: Bass management active: Green LED
• Output power bass amplifier (THD+N with deactivated limiter: 10%): 256 W
• Power supply: Input voltage; -frequency: 100-240V; 50/60 Hz
• Power consumption (230 V / 100 V): Standby: <300 mW
• Power consumption (230 V / 100 V): Idling: 18 W
• Power consumption (230 V / 100 V): Full output power: 410 W
• Inrush current (peak): 30 A @230 VAC
• Standby (idle state): deactivated; 90 min. (default setting); adjustable via software
• Housing material: wooden housing, aluminium electronics rear side
• Housing surface; -colour (front / rear): lacquered; anthracite-metallic (RAL 7021) / black (RAL 9005)
• Operating conditions: +10° C to +40° C, <90% RF; non-condensing
• Transport / storage conditions: -25° C to +70° C; <90% RF; non-condensing
• Woofer: 265 mm (10") with black metal grille cover
• Product dimensions (H x W x D): 383 x 330 x 383 mm
• External net volume: 48.4 litres
• weight: 19,5 kg

Specs:

• Color: Black
• Set Offer: no
• Frequency Range from: 16 Hz
• Frequency Range to: 800 Hz
• Power: 256 W
• Equipment: 1 x 10
• System Type: Active
• Type: Subwoofer
• Theme: Recording and Studio

Instruction manual / Safety instructions:

• Manual (1.01 MB)

Further links:

• Print View