ME Geithain Studio RL-906 Esche furniert schwarz

The RL 906 is the most compact direct-current loudspeaker from our RL series. Its dimensions make it particularly suitable for near-field applications, for use in OB vehicles, as a direct-current loudspeaker for small audio and video studios as well as for 5-channel applications.Like its larger brothers, the active two-way direct-current loudspeaker is built in our special coaxial technology, which allows for a sound compatibility, so that a change between trolley and stationary studio during an ongoing production is not a problem - we have our ambition to do so Sound image of the entire series almost uniform.The RL 906 also fits seamlessly into the larger loudspeakers of the RL series, also with regard to locating accuracy and the smallest possible phantom sound source formation.The directional and bundling dimensions have been designed so that the loudspeakers can be operated at right angles to the radiation plane, ie they do not have to be angled inwards towards the receiver when the base width is small and near-field.This offers decisive advantages in parallel installation in screen walls and during installation in the trolley.

The loudspeaker is equipped with a 13cm condenser and a coaxially arranged 25mm cap, which are controlled by separate MOSFET amplifiers with active switch and electronic overload protection in the rear housing part.The RL 906 has a balanced XLR input with calibratable sensitivity. For the local adjustment of the frequency response, the bass and treble frequency response as well as the range around 300 Hz can be corrected with the controllers located on the rear.A two-color LED is used to indicate the operation and warns of overdriving. The loudspeaker can optionally be magnetically spread-compensated.Various special supports and brackets are available as accessories; Corresponding fastening elements are integrated into the loudspeaker housing.

Features:

• Application: Directing loudspeaker for small audio, video and film studios and near-field applications, OB-cars, surround systems
• Maximum sound level: 104 dB / r = 1m
• Transmission range: 50 Hz ... 20 kHz ± 3 dB
• Calibration of acoustic output levels at PE = -14 dBu:> 76 dB / r = 1m
• Focal range in the range of 200 Hz ... 10 kHz: rising from 1.5 to 11 dB
• Noise level: <= 7 dB (A) / r = 1m
• DB attenuation measured at 83 dB / r = 1 m in the range 150 Hz ... 10 kHz:> = 40 dB
• Nominal input level: + 6 dBu calibratable
• Input impedance:> = 10 kOhm RC symmetrical
• Electronic crossover frequency: 3 kHz
• Nominal output power of the MOSFET output stage: Woofer 80 Watt at 4 Ohm; High-pitch 40 watts at 8 ohms
• Speaker System: Woofer 130 mm cone; High tone 25 mm dome
• Indicator: LED on the front
• Climatic conditions: working temperature range + 15 ° C .... + 35 ° C; Storage temperature range - 25 ° C .... + 45 ° C; Relative humidity 45 .... 75%

Technical Specifications:

• Operating Voltage: 230 Volt ~ ± 10%; 50 ... 60 Hz
• Input connector: XLR 3F
• Power consumption: max. 100 watt at full power
• Power supply: Euro cold box
• Dimensions H x W x D in mm: 255 x 180 x 200
• Weight: 5.5 kg

Specs:

• Color: Ash
• Woofer: 1 x 5
• Frequency Range from: 50 Hz
• Frequency Range to: 20000 Hz
• Set Offer: no
• Number of paths: 2-way
• Type: Studio Monitor
• Theme: Recording and Studio

Instruction manual / Safety instructions:

• Manual (587.08 KB)

Downloads:

• Booklet (1.07 MB)

Further links:

• Print View